Open Log File = S7GSD_LOG.TXT;  ;;;; 9-9-2004, 10:56:00 ;;;;;;
Shared Components Setup Source Version: R5.2.00.14
CompMasterFrame Name:   MasterFrame_Comp
CompMasterFrame Version:2002-02-21_R5.2.00.14_BaseIS553

    The SETUP is started from: E:\sw\ncm pc\disk1\s7gsd\

Files to delete: C:\WINDOWS\, S7GSD_LOG.TXT.new
Commandline parameter: INTERPRETED: 
 
Official name of this Shared Component: SIMATIC GSD CONTROL
Internal name: S7GSD
Release: V3.1.0.0_2.1.0.0
Version: 3.1
MainProd name: STEP7
MainProd display name: STEP 7

Setting setup language:
    Initial setup language dll: S7esetdb.DLL
    Get operating system (Win) language from KERNEL: Spanish ; D
    Get SetupLanguage as input-parameter of client from Registry: B
Display: Small Fonts
Display: Big window solution detected.

    Change Setup Language?
    The language DLL is up to date.
    After eventual change: Used language dll: S7esetdb.DLL

Allowable OS: WIN95,WINNT40, WIN2000
    Operating System type: NT ; Real OS: Windows 2000 or higher
    Operating System ServicePack: 1
    Win 2000 allowed.
User has Administrator rights, O.K.

Main Path and Common Path determination:
    Dirs: Dont use Common Path  !!!!!!!
    Dirs: Dont use MAIN Path  !
     
    MS_SharedFiles_Counter:
       Body entry: C:\Siemens\SIMATIC_NCM\S7bin\s7wnsvvb.dll
       Body entry: C:\Siemens\SIMATIC_NCM\S7bin\s7wnsveb.hlp
       Body entry: C:\Siemens\SIMATIC_NCM\S7bin\s7wnsvvd.dll
       Body entry: C:\Siemens\SIMATIC_NCM\S7bin\s7wnsved.hlp
       Body entry: C:\Siemens\SIMATIC_NCM\S7bin\s7wnfwlx.exe
       Body entry: C:\Siemens\SIMATIC_NCM\S7bin\s7wnsvvx.dll
       Body entry: C:\Siemens\SIMATIC_NCM\S7bin\s7wndiax.dll
    MS_SharedFiles_Counter('C:\DOCUME~1\ww\CONFIG~1\Temp\_ISTMP4.DIR\_ISTMP1.DIR\') - Shared files in reg.: 710 , bodys(Leichen):7 , cleaned: 0
     

--- Test if Shared Component setup is new installation, overinstallation, update, install for new client:
Actual Component Release:               V3.1.0.0_2.1.0.0  (3010000)
Gotten Component Release from Registry:   (-1)
    
How to install component:
    New installation! No 'CLIENTS' key has existed; OK.


Deinstall Key: Comp_Def
Files to delete: C:\WINDOWS\Setup\S7GSD, DeIsL?.isu
Files to delete: C:\WINDOWS\Setup\S7GSD, Uninst.log

StartAppl

Define the file set, printout all main parameters:
    ExtendedUninstallPath: C:\WINDOWS\Setup\S7GSD
    AUT Common Path:       C:\DOCUME~1\ww\CONFIG~1\Temp\_ISTMP4.DIR\_ISTMP1.DIR\
    MAIN Path:           C:\WINDOWS\

Transfer the files
Component install with SELFREGISTERBATCH

PerformFileTransfer:
    Target <WINDIR>    = C:\WINDOWS\
    Target <WINSYSDIR> = C:\WINDOWS\System32\
    Target <szTargDrv> = C:\WINDOWS\System32\Drivers
    Target <szTargCom> (Common Dir) = C:\DOCUME~1\ww\CONFIG~1\Temp\_ISTMP4.DIR\_ISTMP1.DIR\
    Target <TARGETDIR> (szBaseDir ) = C:\WINDOWS\

    Target <SvTargOwn> = C:\DOCUME~1\ww\CONFIG~1\Temp\_ISTMP4.DIR\_ISTMP1.DIR\
    Target <szTargExa> = C:\WINDOWS\Examples
    Target <szTargPrv> = C:\WINDOWS\Setup\S7GSD
    Target <szTargMan> = C:\WINDOWS\
    Target <szTargIns> = C:\WINDOWS\Install

    Successfully deselected WIN95 file groups (actual OS: NT)
    Successfully deselected WIN NT 4 file groups.

    Copy 'Data' containers!
Selected:
Common
   Common\LangIndep1
   Common\Lang1
   Common\Lang2
   Common\Lang3
   Common\Lang4
   Common\Lang5
   Common\CommonCore
ODBC30
   ODBC30\Core
   ODBC30\CoreDesk
   ODBC30\CodePage
   ODBC30\DBCommon
   ODBC30\UnInst
Program
   Program\LangIndep1
   Program\LangIndep2
   Program\Lang1
   Program\Lang2
   Program\Lang3
   Program\Lang4
   Program\Lang5
   Program\ProgramCore
Win
   Win\Win1
   Win\Win_2K
WinDrv
   WinDrv\WinDrv1
   WinDrv\WinDrv_2K
WinSys
   WinSys\WinSys1
   WinSys\WinSys_2K
Prg_S7_NT4_2K
Prg_Com_NT4_2K
S7Reg2K

    Size of 'Data' components: 196671
    Successfully deselected WIN95 file groups (actual OS: NT)
    Successfully deselected WIN NT 4 file groups.

    Copy 'Data.cor' containers!
Core Components selected:
ODBC30
   ODBC30\Core
   ODBC30\CoreDesk
   ODBC30\CodePage
   ODBC30\DBCommon
   ODBC30\UnInst
Win
   Win\Win2
   Win\Win_2K_Core
WinDrv
   WinDrv\WinDrv2
   WinDrv\WinDrv_2K_Core
WinSys
   WinSys\WinSys2
   WinSys\WinSys_2K_Core

    Size of 'Data.cor' components: 405776

Check the copied files
 Input 'CheckFiles': IS_Output.txt
	 Number of files (incl. temp. and for all OS): 4, A,B,C,D,E
 Output			File
		Fl PC 	Fl InF 	D PC 		D InF		Version PC
 ------------------- Test done for IS_Output.txt
    All tested files: 4
    Really copied files: 4
    Filtered files (OS, lang., ..): 0
    System language from DLL - ID: 3082
    System language: Spanish ID: 3082
    System language not found:. Available: 
    Windows language: 
    - ExtendedUninstallPath: 

Get Wordpad Path
    Invalid Wordpad Path: "%ProgramFiles%\Windows NT\Accesorios\WORDPAD.EXE" "%1"
    Wordpad found: C:\ARCHIV~1\WINDOW~1\ACCESO~1\WORDPAD.EXE
Folder: 
    Create program folder and icons to: 
    Icons language: A
    Target Dir: C:\WINDOWS
    FOLDER_STARTMENU : C:\Documents and Settings\All Users\Men Inicio\
    g_svStartMenuLoc : C:\Documents and Settings\All Users\Men Inicio\
    D_DEF_PROGGROUP  : Simatic
    szFolderPr       : 
    Program icons -  long path: C:\Documents and Settings\All Users\Men Inicio\
Per-Applications Path: , 
    Not longer in Registry: Software\Microsoft\Windows\CurrentVersion\App Paths\S7SharedComp
 

Selfregistration:

    Selfreg done.

Add REG - Files Registry:
 
ReplacePathVariables
 
Start searching for .reg Files!
Number of .reg files to register:0

Create the Component RegistryKey
    Uninstall: Software\Siemens\Shared Tools\S7GSD
    Product installed: STEP7

Selfregister Files by Regserver:
    Waiting on Regsvr: 
    Install C:\WINDOWS\SETUP\comp-regsvr32.exe /S "C:\WINDOWS\System32\gsdectrl.dll" Result: 0



StartApplAfter



    Write Version:                  3.1
    Write Release:                  V3.1.0.0_2.1.0.0
    Write Corr:                     
    Display Name                    SIMATIC GSD CONTROL
    Logfilename                     C:\WINDOWS\S7GSD_LOG.TXT
    Uninstallkey exists before Move
    Move UNINSTALL                  C:\WINDOWS\IsUn040a.exe -a -y  -fC:\WINDOWS\Setup\S7GSD\DeIsL1.isu -c"C:\WINDOWS\System32\S7esetdx.dll
    Add Client:                     STEP7 SP3
Result parameters in registry:
    Write ComponentEntry:           S7GSD
    Write Restart:                  0
    Write Logfilename:              C:\WINDOWS\S7GSD_LOG.TXT
    Write SetupSucceeded:           1
    (Values '1' and '2': Setup successful.)
    Delete Client entry             

Log File Closed ;;;;; 9-9-2004, 10:56:08 ;;;;;;
             
--------------UninstInitialize Start-----------------

  UI:  ;03-06-2007;15:08:09
              
  UI:  S7GSD 3.1
  UI:  ---------------------
CheckDeinstComponents: S7GSD 3.1

  UI:  It is a Component
  UI:  - Clients found
  UI:  Number of Clients: 0

  UI:  Clients not found, Deinstall
  UI:  Citamisfile: C:\WINDOWS\citamis.str
  UI:  Eintrag in Citamisfile:         Deinst S7GSD;     Version: 3.1;03-06-2007;15:08:09

              
  UI:  START: SecPreCheckRunAppl-Section

              
  UI:  END: SecPreCheckRunAppl-Section

              
  UI:  START: SecPreStartAppl-Section

              
  UI:  END: SecPreStartAppl-Section

              
  UI:  START: SecPreDelPacks-Section

              
  UI:  START: SecPreDelComps-Section

              
  UI:  END: SecPreDelComps-Section

              
  UI:  START: SelfUnregister-Section

              
  UI:  END: SelfUnregister-Section

              
  UI:  START: SecPreCallDll-Section

  UI: WARNING: Es wurden kein Aufruf von Dlls durchgefuehrt.
              
  UI:  END: SecPreCallDll-Section

              
  UI:  START: SecChangeAttrib-Section

              
  UI:  END: SecChangeAttrib-Section

  UI:  UninstInitialize() ok.
  UI:  ;03-06-2007;15:08:09
              
             
--------------UninstInitialize Ende------------------

             
--------------UninstUnInitialize Start---------------

  UI:  ;03-06-2007;15:08:12
              
  UI:  S7GSD 3.1
              
  UI:  START: DeleteRegKey-Section

              
  UI:  END: DeleteRegKey-Section

              
  UI:  START: SecPostDelComps-Section

              
  UI:  END: SecPostDelComps-Section

              
  UI:  START: SecPostEraseFiles-Section

              
  UI:  END: SecPostEraseFiles-Section

              
  UI:  START: SecPostDelDirs-Section

              
  UI:  END: SecPostDelDirs-Section

              
  UI:  START: SecPostEraseDirs-Section

              
  UI:  END: SecPostEraseDirs-Section

              
  UI:  START: SecPreStartAppl-Section

              
  UI:  END: SecPreStartAppl-Section

              
  UI:  START: CleanLanguageFolderInStartmenu

  UI:  END: CleanLanguageFolderInStartmenu

              
  UI:  Temporre Kommunikationsdatei C:\DOCUME~1\ADMINI~1\CONFIG~1\Temp\4016e.tmp geloescht.
  UI:  Kommunikationsdatei C:\WINDOWS\SETUP\S7GSD\uninst.log geloescht.
  UI:  Installationsverzeichnis C:\WINDOWS\SETUP\S7GSD\ geloescht.
  UI:  ;03-06-2007;15:08:12
              
  UI:  Citamisfile: C:\WINDOWS\citamis.str
  UI:  Eintrag in Citamisfile:         ----> done Deinst S7GSD

             
--------------UninstUnInitialize Ende----------------

================================================================================

Logfile created/appended by setup-caller 'adscompsx.dll' ...

Ext:  - Nested: 1 - Deinst: 
 
--------------------------------------------------------------------------------
 
***  SETUP LOGFILE *** - Shared Component Setup (MSI V3.1/IS V11)

Filename:      S7GSD_LOG.TXT
Install start: 3-6-2007, 15:25:21

Frame Name:       Component_Masterframe
Frame Version:    V02.01.01.11_11.00.00.01
Frame Date:       2007-07-26

    -- MSI Neuinstallation angenommen. REINSTALL: 0
    Ini file will be: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC06ADD-3A54-11D6-92A8-00A0245B3AC6}\properties.ini
    Commandline at first: 
     

StreamOut files from 'C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC06ADD-3A54-11D6-92A8-00A0245B3AC6}\'..
Streamed out: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC06ADD-3A54-11D6-92A8-00A0245B3AC6}\properties.ini
    The SETUP is started from: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC06ADD-3A54-11D6-92A8-00A0245B3AC6}\
     
Commandline parameter:  INTERPRETED: 
    Trace: LoggingMax activated.
 
Official name of this Shared Component: SIMATIC GSD CONTROL
Internal name: S7GSD
Release: K3.5.1.0_1.4.0.1
Version: 3.5.1.0
Comparing with data of 'C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC06ADD-3A54-11D6-92A8-00A0245B3AC6}\version.ini' .
MainProd name: STEP7
MainProd display name: STEP 7

Setting setup language:
    Initial setup language dll: S7esetdb.DLL
    Get operating system (Win) language from KERNEL: Spanish ; D
    Get SetupLanguage as input-parameter of client from Registry: D

    Change Setup Language?
    Wanted: D, actual:  B
CA: _ADS_SetDirs  begin
    TRACE:  STARTMENU_PLACE: AUTO
 Set classic startmenue= C:\Documents and Settings\All Users\Men Inicio\
CA: _ADS_SetDirs  end


Begin  Comp_BeforeDataMove()

Test Operating System
    Found Operating System: 
       VersionNT = 501
       ServicePackLevel = 1
       NTProductType = 1
    Allowable OS: Win2k,WinXP&>
    OperatingSystem condition string to check: ((VersionNT=500)) OR ((VersionNT>=501))
    Condition is True: Installation is allowed.
User has Administrator rights, O.K.

Main Path and Common Path determination:
    Dirs: Dont use Common Path  !!!!!!!
    Dirs: Dont use MAIN Path  !
    REINSTALL: 0
    INSTALLDIR was set to: C:\WINDOWS\
     
     

--- Test if Shared Component setup is new installation, overinstallation, update, install for new client:
    Test 8x2 Release ...
    
How to install component:
    New installation! No 'CLIENTS' key has existed; OK.

		No Deinstallation flag set!!	
End  Comp_BeforeDataMove()


 CopyLockedFiles (RenameFilesAtReboot): Stream out: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC06ADD-3A54-11D6-92A8-00A0245B3AC6}\CopyFiles.ini
	 CopyLockedFiles (RenameFilesAtReboot): No files listed.


Shortcuts..

Startmenu language tested- for shortcuts: 3082
Startmenu language used for shortcuts: 1033

WriteRegistryValues
    create Directory for IniFile: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC06ADD-3A54-11D6-92A8-00A0245B3AC6}
    Streamout MBRegEntries.ini to: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC06ADD-3A54-11D6-92A8-00A0245B3AC6}\MBRegEntries.ini

Selfregister Files by Regserver:
    Waiting on Regsvr: 
start CreateProcess 
    Install C:\WINDOWS\System32\regsvr32.exe /S "C:\WINDOWS\System32\GSDECTRL.DLL" Result: 0




    Add Client:                     STEP7_{DF316006-FA84-40B0-B9B0-880B6487D5D7}
    Write Version:                  3.5.1.0
    Write Release:                  K3.5.1.0_1.4.0.1
    Display Name                    SIMATIC GSD CONTROL
    Logfilename                     C:\WINDOWS\S7GSD_LOG.TXT
Result parameters in registry:
    Write ComponentEntry:           S7GSD
    Write Restart:                  0
    Write Logfilename:              C:\WINDOWS\S7GSD_LOG.TXT
    Write returncode first step:    1
    IScript code finished.
    Delete Ini file: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC06ADD-3A54-11D6-92A8-00A0245B3AC6}\properties.ini
    The temp. directory is: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC06ADD-3A54-11D6-92A8-00A0245B3AC6}\

Log File Closed (first step);;;;; 3-6-2007, 15:25:27 ;;;;;;

Ext:  - Nested: 1 - Deinst: 1
 
--------------------------------------------------------------------------------
 
***  SETUP LOGFILE *** - Shared Component Setup (MSI V3.1/IS V11)

Filename:      S7GSD_LOG.TXT
Install start: 1-3-2007, 13:06:10

Frame Name:       Component_Masterframe
Frame Version:    V02.01.01.11_11.00.00.01
Frame Date:       2007-07-26

    --- Deinstallation--- !
    Ini file will be: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC06ADD-3A54-11D6-92A8-00A0245B3AC6}\properties.ini
    Commandline at first: 
     

StreamOut files from 'C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC06ADD-3A54-11D6-92A8-00A0245B3AC6}\'..
Streamed out: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC06ADD-3A54-11D6-92A8-00A0245B3AC6}\properties.ini
    The SETUP is started from: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC06ADD-3A54-11D6-92A8-00A0245B3AC6}\
     
Commandline parameter:  INTERPRETED: 
    Trace: LoggingMax activated.
 
Official name of this Shared Component: SIMATIC GSD CONTROL
Internal name: S7GSD
Release: K3.5.1.0_1.4.0.1
Version: 3.5.1.0
No 'version.ini' file read because of Deinstall.
MainProd name: STEP7
MainProd display name: STEP 7

Setting setup language:
    Initial setup language dll: S7esetdb.DLL
    Get operating system (Win) language from KERNEL: Spanish ; D
    Get SetupLanguage as input-parameter of client from Registry: D

    Change Setup Language?
    Wanted: D, actual:  B
CA: _ADS_SetDirs  begin
    TRACE:  STARTMENU_PLACE: AUTO
 Set classic startmenue= C:\Documents and Settings\All Users\Men Inicio\
CA: _ADS_SetDirs  end

    
    Uninstalling shared component...
    
    Property ADS_DEINST, read successfully: 1
    Property ADS_CALLED_NESTED, read successfully: 1
    Now test Uninstall dependencies...

Main Path and Common Path determination:
    Dirs: Dont use Common Path  !!!!!!!
    Dirs: Dont use MAIN Path  !
    REINSTALL: 0
    INSTALLDIR from Registry: 
    Property INSTALLDIR not changed because already installed: 
     
     

Shortcuts..

    TRACE: create Directory for IniFile: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC06ADD-3A54-11D6-92A8-00A0245B3AC6}
    TRACE: Streamout MBShortcuts to: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC06ADD-3A54-11D6-92A8-00A0245B3AC6}\MBShortcuts.ini
Startmenu language tested- for shortcuts: 3082
Startmenu language used for shortcuts: 1033
CA: _ADS_UnRegisterFiles  begin

UnRegisterFiles:
    Look for Regserver in: D:\bin\REGSVR32.EXE
    Look for Regserver in: C:\WINDOWS\s7bin\REGSVR32.EXE
    Regserver found (only used for .dll files etc.): C:\WINDOWS\Setup\Comp-REGSVR32.EXE
    TRACE: Path to add from ini: 
    TRACE: Used Environment: 
CA: _ADS_UnRegisterFiles  end

CA: _ADS_EraseDirs  begin
CA: _ADS_EraseDirs  end


 CopyLockedFiles (RenameFilesAtReboot): Stream out: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC06ADD-3A54-11D6-92A8-00A0245B3AC6}\CopyFiles.ini
	 CopyLockedFiles (RenameFilesAtReboot): No files listed.

??? I_WARNING: Problems deleting own key: Software\Siemens\Shared Tools\S7GSD
    
    Uninstall finished normally.
    
    Delete Ini file: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC06ADD-3A54-11D6-92A8-00A0245B3AC6}\properties.ini
    The temp. directory is: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC06ADD-3A54-11D6-92A8-00A0245B3AC6}\

Log File Closed (first step);;;;; 1-3-2007, 13:06:15 ;;;;;;
================================================================================

Logfile created/appended by setup-caller 'adscompsx.dll' ...


CA: _ExitIfStandAlone   [2007-01-03 13:20:27]
Ext:  - Nested: 1 - Deinst: 
 
--------------------------------------------------------------------------------
 
***  SETUP LOGFILE *** - Shared Component Setup (MSI V3.1/IS V11)

Filename:      S7GSD_LOG.TXT
Install start: 1-3-2007, 13:20:27

Frame Name:       Component_Masterframe
Frame Version:    V02.01.01.19_11.00.00.02
Frame Date:       2008-05-09


CA: IniC_StreamOutIniFiles  START 13:20:27
    -- MSI Neuinstallation angenommen. REINSTALL: 0
    Ini file will be: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC06ADD-3A54-11D6-92A8-00A0245B3AC6}\properties.ini
    Commandline at first: 
     
CA: IniC_StreamOutIniFiles  END 13:20:27

CA: _StreamOutSteuerdatei  BEGIN  [13:20:27]

StreamOut files from 'C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC06ADD-3A54-11D6-92A8-00A0245B3AC6}\'..
Streamed out: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC06ADD-3A54-11D6-92A8-00A0245B3AC6}\properties.ini
CA: _StreamOutSteuerdatei  END  [13:20:27]

CA: Comp_Initialize  START 13:20:27
    The SETUP is started from: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC06ADD-3A54-11D6-92A8-00A0245B3AC6}\
     
Commandline parameter:  INTERPRETED: 
    Trace: LoggingMax activated.
 
Official name of this Shared Component: SIMATIC GSD CONTROL
Internal name: S7GSD
Release: K3.5.2.0_1.2.0.1
Version: 3.5.2.0
Comparing with data of 'C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC06ADD-3A54-11D6-92A8-00A0245B3AC6}\version.ini' .
MainProd name: STEP7
MainProd display name: STEP 7

Setting setup language:
    Initial setup language dll: S7esetdb.DLL
    Get operating system (Win) language from KERNEL: Spanish ; D
    Get SetupLanguage as input-parameter of client from Registry: B

    Change Setup Language?
    The language is up to date.
CA: Comp_Initialize  END 13:20:27

CA: _ADS_SetDirs  BEGIN  [13:20:27]
    TRACE:  STARTMENU_PLACE: AUTO
 Set classic startmenue= C:\Documents and Settings\All Users\Men Inicio\
CA: _ADS_SetDirs  END  [13:20:27]

CA: Comp_BeforeDataMove  START 13:20:31

Test Operating System
    Found Operating System: 
       VersionNT = 501
       ServicePackLevel = 3
       NTProductType = 1
    Allowable OS: Win2k,WinXP&>
    OperatingSystem condition string to check: ((VersionNT=500)) OR ((VersionNT>=501))
    Condition is True: Installation is allowed.
User has Administrator rights, O.K.

Main Path and Common Path determination:
    Dirs: Dont use Common Path  !!!!!!!
    Dirs: Dont use MAIN Path  !
    REINSTALL: 0
    INSTALLDIR was set to: C:\WINDOWS\
     
     

--- Test if Shared Component setup is new installation, overinstallation, update, install for new client:
    Test 8x2 Release ...
    
How to install component:
    New installation! No 'CLIENTS' key has existed; OK.

		No Deinstallation flag set!!	
CA: Comp_BeforeDataMove  END 13:20:32

CA: _ads_copyfiles  BEGIN 13:20:32


 CopyLockedFiles (RenameFilesAtReboot): Stream out: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC06ADD-3A54-11D6-92A8-00A0245B3AC6}\CopyFiles.ini
	 CopyLockedFiles (RenameFilesAtReboot): No files listed.


CA: _ads_copyfiles  END 13:20:32

Create Shortcuts...
    create Directory for IniFile: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC06ADD-3A54-11D6-92A8-00A0245B3AC6}
  Streamout MBShortcuts to: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC06ADD-3A54-11D6-92A8-00A0245B3AC6}\MBShortcuts.ini
  Startmenu language tested for shortcuts: 3082
  Startmenu language used for shortcuts: 1033
End Shortcuts


CA: _ADS_WriteRegistryValues  BEGIN  [13:20:33]
    create Directory for IniFile: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC06ADD-3A54-11D6-92A8-00A0245B3AC6}
    Streamout MBRegEntries.ini to: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC06ADD-3A54-11D6-92A8-00A0245B3AC6}\MBRegEntries.ini
CA: _ADS_WriteRegistryValues  END  [13:20:33]

CA: Comp_AfterDataMove  START 13:20:33

Selfregister Files by Regserver:
    Waiting on Regsvr: 

start CreateProcess  [13:20:33]
    Install C:\WINDOWS\system32\regsvr32.exe /S "C:\WINDOWS\system32\GSDECTRL.DLL" Result: 0




    Add Client:                     STEP7_{8FE175F3-16FA-4671-9DB4-983D2DAFE232}
    Write Version:                  3.5.2.0
    Write Release:                  K3.5.2.0_1.2.0.1
    Display Name                    SIMATIC GSD CONTROL
    Logfilename                     C:\WINDOWS\S7GSD_LOG.TXT
Result parameters in registry:
    Write ComponentEntry:           S7GSD
    Write Restart:                  0
    Write Logfilename:              C:\WINDOWS\S7GSD_LOG.TXT
    Write returncode first step:    1
    IScript code finished.
CA: Comp_AfterDataMove  END 13:20:35

CA: IniC_DeleteIniFiles  START 13:20:35
    Delete Ini file: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC06ADD-3A54-11D6-92A8-00A0245B3AC6}\properties.ini
CA: IniC_DeleteIniFiles  END 13:20:35
    The temp. directory is: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC06ADD-3A54-11D6-92A8-00A0245B3AC6}\

Log File Closed (first step);;;;; 1-3-2007, 13:20:35 ;;;;;;


CA: _ExitIfStandAlone   [2007-01-03 13:41:15]
Ext:  - Nested: 1 - Deinst: 1
 
--------------------------------------------------------------------------------
 
***  SETUP LOGFILE *** - Shared Component Setup (MSI V3.1/IS V11)

Filename:      S7GSD_LOG.TXT
Install start: 1-3-2007, 13:41:15

Frame Name:       Component_Masterframe
Frame Version:    V02.01.01.19_11.00.00.02
Frame Date:       2008-05-09


CA: IniC_StreamOutIniFiles  START 13:41:15
    --- Deinstallation--- !
    Ini file will be: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC06ADD-3A54-11D6-92A8-00A0245B3AC6}\properties.ini
    Commandline at first: 
     
CA: IniC_StreamOutIniFiles  END 13:41:15

CA: _StreamOutSteuerdatei  BEGIN  [13:41:15]

StreamOut files from 'C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC06ADD-3A54-11D6-92A8-00A0245B3AC6}\'..
Streamed out: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC06ADD-3A54-11D6-92A8-00A0245B3AC6}\properties.ini
CA: _StreamOutSteuerdatei  END  [13:41:15]

CA: Comp_Initialize  START 13:41:15
    The SETUP is started from: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC06ADD-3A54-11D6-92A8-00A0245B3AC6}\
     
Commandline parameter:  INTERPRETED: 
    Trace: LoggingMax activated.
 
Official name of this Shared Component: SIMATIC GSD CONTROL
Internal name: S7GSD
Release: K3.5.2.0_1.2.0.1
Version: 3.5.2.0
No 'version.ini' file read because of Deinstall.
MainProd name: STEP7
MainProd display name: STEP 7

Setting setup language:
    Initial setup language dll: S7esetdb.DLL
    Get operating system (Win) language from KERNEL: Spanish ; D
    Get SetupLanguage as input-parameter of client from Registry: B

    Change Setup Language?
    The language is up to date.
CA: Comp_Initialize  END 13:41:15

CA: _ADS_SetDirs  BEGIN  [13:41:15]
    TRACE:  STARTMENU_PLACE: AUTO
 Set classic startmenue= C:\Documents and Settings\All Users\Men Inicio\
CA: _ADS_SetDirs  END  [13:41:15]

CA: Comp_BeforeDataMoveUninstall  START 13:41:15
    
Uninstalling shared component...
    
    Property ADS_DEINST, read successfully: 1
    Property ADS_CALLED_NESTED, read successfully: 1
    Now test Uninstall dependencies...

Main Path and Common Path determination:
    Dirs: Dont use Common Path  !!!!!!!
    Dirs: Dont use MAIN Path  !
    REINSTALL: 0
    INSTALLDIR from Registry: 
    Property INSTALLDIR not changed because already installed: 
     
     
CA: Comp_BeforeDataMoveUninstall  END 13:41:15

Remove Shortcuts...
    create Directory for IniFile: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC06ADD-3A54-11D6-92A8-00A0245B3AC6}
  Streamout MBShortcuts to: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC06ADD-3A54-11D6-92A8-00A0245B3AC6}\MBShortcuts.ini
  Startmenu language tested for shortcuts: 3082
  Startmenu language used for shortcuts: 1033
End Shortcuts


CA: _ADS_UnRegisterFiles  BEGIN  [13:41:18]
UnRegisterFiles:
    Look for Regserver in: D:\bin\REGSVR32.EXE
    Look for Regserver in: C:\WINDOWS\s7bin\REGSVR32.EXE
    Regserver found (only used for .dll files etc.): C:\WINDOWS\Setup\Comp-REGSVR32.EXE
    TRACE: Path to add from ini: 
    TRACE: Used Environment: 
CA: _ADS_UnRegisterFiles  END  [13:41:18]

CA: _ADS_EraseDirs  BEGIN  [13:41:18]
CA: _ADS_EraseDirs  END  [13:41:18]

CA: _ads_copyfiles  BEGIN 13:41:18


 CopyLockedFiles (RenameFilesAtReboot): Stream out: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC06ADD-3A54-11D6-92A8-00A0245B3AC6}\CopyFiles.ini
	 CopyLockedFiles (RenameFilesAtReboot): No files listed.


CA: _ads_copyfiles  END 13:41:18

CA: Comp_AfterDataMoveUninstall  START 13:41:18
??? I_WARNING: Problems deleting own key: Software\Siemens\Shared Tools\S7GSD
    
    Uninstall finished normally.
    
CA: Comp_AfterDataMoveUninstall  END 13:41:19

CA: IniC_DeleteIniFiles  START 13:41:19
    Delete Ini file: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC06ADD-3A54-11D6-92A8-00A0245B3AC6}\properties.ini
CA: IniC_DeleteIniFiles  END 13:41:19
    The temp. directory is: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC06ADD-3A54-11D6-92A8-00A0245B3AC6}\

Log File Closed (first step);;;;; 1-3-2007, 13:41:19 ;;;;;;
================================================================================

Logfile created/appended by setup-caller 'adscompsx.dll' ...


CA: _ExitIfStandAlone   [2007-01-03 14:58:38]
Ext:  - Nested: 1 - Deinst: 
 
--------------------------------------------------------------------------------
 
***  SETUP LOGFILE *** - Shared Component Setup (MSI V3.1/IS V11)

Filename:      S7GSD_LOG.TXT
Install start: 1-3-2007, 14:58:38

Frame Name:       Component_Masterframe
Frame Version:    V02.01.01.19_11.00.00.02
Frame Date:       2008-05-09


CA: IniC_StreamOutIniFiles  START 14:58:38
    -- MSI Neuinstallation angenommen. REINSTALL: 0
    Ini file will be: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC06ADD-3A54-11D6-92A8-00A0245B3AC6}\properties.ini
    Commandline at first: 
     
CA: IniC_StreamOutIniFiles  END 14:58:38

CA: _StreamOutSteuerdatei  BEGIN  [14:58:38]

StreamOut files from 'C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC06ADD-3A54-11D6-92A8-00A0245B3AC6}\'..
Streamed out: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC06ADD-3A54-11D6-92A8-00A0245B3AC6}\properties.ini
CA: _StreamOutSteuerdatei  END  [14:58:38]

CA: Comp_Initialize  START 14:58:38
    The SETUP is started from: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC06ADD-3A54-11D6-92A8-00A0245B3AC6}\
     
Commandline parameter:  INTERPRETED: 
    Trace: LoggingMax activated.
 
Official name of this Shared Component: SIMATIC GSD CONTROL
Internal name: S7GSD
Release: K3.5.2.0_1.2.0.1
Version: 3.5.2.0
Comparing with data of 'C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC06ADD-3A54-11D6-92A8-00A0245B3AC6}\version.ini' .
MainProd name: STEP7
MainProd display name: STEP 7

Setting setup language:
    Initial setup language dll: S7esetdb.DLL
    Get operating system (Win) language from KERNEL: Spanish ; D
    Get SetupLanguage as input-parameter of client from Registry: B

    Change Setup Language?
    The language is up to date.
CA: Comp_Initialize  END 14:58:38

CA: _ADS_SetDirs  BEGIN  [14:58:38]
    TRACE:  STARTMENU_PLACE: AUTO
 Set classic startmenue= C:\Documents and Settings\All Users\Men Inicio\
CA: _ADS_SetDirs  END  [14:58:38]

CA: Comp_BeforeDataMove  START 14:58:42

Test Operating System
    Found Operating System: 
       VersionNT = 501
       ServicePackLevel = 3
       NTProductType = 1
    Allowable OS: Win2k,WinXP&>
    OperatingSystem condition string to check: ((VersionNT=500)) OR ((VersionNT>=501))
    Condition is True: Installation is allowed.
User has Administrator rights, O.K.

Main Path and Common Path determination:
    Dirs: Dont use Common Path  !!!!!!!
    Dirs: Dont use MAIN Path  !
    REINSTALL: 0
    INSTALLDIR was set to: C:\WINDOWS\
     
     

--- Test if Shared Component setup is new installation, overinstallation, update, install for new client:
    Test 8x2 Release ...
    
How to install component:
    New installation! No 'CLIENTS' key has existed; OK.

		No Deinstallation flag set!!	
CA: Comp_BeforeDataMove  END 14:58:42

CA: _ads_copyfiles  BEGIN 14:58:43


 CopyLockedFiles (RenameFilesAtReboot): Stream out: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC06ADD-3A54-11D6-92A8-00A0245B3AC6}\CopyFiles.ini
	 CopyLockedFiles (RenameFilesAtReboot): No files listed.


CA: _ads_copyfiles  END 14:58:43

Create Shortcuts...
    create Directory for IniFile: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC06ADD-3A54-11D6-92A8-00A0245B3AC6}
  Streamout MBShortcuts to: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC06ADD-3A54-11D6-92A8-00A0245B3AC6}\MBShortcuts.ini
  Startmenu language tested for shortcuts: 3082
  Startmenu language used for shortcuts: 1033
End Shortcuts


CA: _ADS_WriteRegistryValues  BEGIN  [14:58:43]
    create Directory for IniFile: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC06ADD-3A54-11D6-92A8-00A0245B3AC6}
    Streamout MBRegEntries.ini to: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC06ADD-3A54-11D6-92A8-00A0245B3AC6}\MBRegEntries.ini
CA: _ADS_WriteRegistryValues  END  [14:58:43]

CA: Comp_AfterDataMove  START 14:58:43

Selfregister Files by Regserver:
    Waiting on Regsvr: 

start CreateProcess  [14:58:43]
    Install C:\WINDOWS\system32\regsvr32.exe /S "C:\WINDOWS\system32\GSDECTRL.DLL" Result: 0




    Add Client:                     STEP7_{8FE175F3-16FA-4671-9DB4-983D2DAFE232}
    Write Version:                  3.5.2.0
    Write Release:                  K3.5.2.0_1.2.0.1
    Display Name                    SIMATIC GSD CONTROL
    Logfilename                     C:\WINDOWS\S7GSD_LOG.TXT
Result parameters in registry:
    Write ComponentEntry:           S7GSD
    Write Restart:                  0
    Write Logfilename:              C:\WINDOWS\S7GSD_LOG.TXT
    Write returncode first step:    1
    IScript code finished.
CA: Comp_AfterDataMove  END 14:58:46

CA: IniC_DeleteIniFiles  START 14:58:46
    Delete Ini file: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC06ADD-3A54-11D6-92A8-00A0245B3AC6}\properties.ini
CA: IniC_DeleteIniFiles  END 14:58:46
    The temp. directory is: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC06ADD-3A54-11D6-92A8-00A0245B3AC6}\

Log File Closed (first step);;;;; 1-3-2007, 14:58:46 ;;;;;;
